Overall Approx. Tray Size : 56L x 40Wcm.
Adjustable height of tray Approx. 760 to 1150mm through gear handle
Frame work made of 50 x 25mm rectangular S.S. tubes
Tray made of 0.9mm thick S.S. 304 Grade sheet
Table mounted on 50mm dia castors
Finish : S.S. Frame with S.S. top
Also available in M.S. Frame (EI - 1787)
Model No : EI - 1785A
O.T. MAYO'S INSTRUMENT TROLLEY WITH S.S. TRAY
Tray size S.S. : 56 L x 40 W cms.
Rectangular S.S. tubes mounted on 5cms Castors height adjustable by side Knob
S.S. Frame with S.S. top
Also available in M.S. Frame (EI - 1785)
Approx. Size : 3O" x 18" x 32”
Frame work made of S.S. tubes
Two S.S. Shelves over with S.S. railings
The trolley is fitted with S.S. bucket and S.S. bowl
The trolley mounted on 100mm dia castors
Also available in M.S. (EI - 1505)
Four leg base fitted with PVC Stumps
Height adjustment by machine screw from
A foot rest ring support made of M.S. Tube
S.S. top supported with M.S. sheet top
Finish : Pre-treated and Epoxy Powder Coated
Also available in S.S. Frame work and S.S. Top
Approx. Size 12”x 12"x 20”H
Top made of CRCA Sheet double bent
Legs made of 25mm x 18 G and Horizontal Support of 19mm x 18 G CRCA Tube fitted with PVC Stumps
Finish : Pre treated and Epoxy Powder Coated
cushioned seat 5 legs base on castors
1. Frame work made of 1”x 18G vertical M.S. Tubes
2. Two 22G S.S. Shelves with 3 sides railing
3. The trolley mounted on 100mm dia castors
4. Finish : S.S. Frame with S.S. Shelves A- 30”x 18”x 32” / B- 36"x 24"x 32"
Also available in M.S. (EI - 1520)
1. Overall Approx. Size: 800mm L x 600mm D x 1400 H
2.Four shelves and one drawers
3. Trolley having two handle
4. The trolley mounted on 125mm dia castors -2 with brakes
5. Switch & Socket for medical equipment
6. Supplied with S.S. I.V. Rod and M.S. Oxygen Gas Cylinder Cage
7. Finish : Pre-treated and Epoxy Powder Coated
1. Overall Approx. Size : 960 x 500W x 1545H mm
2. Frame work made of S.S. Tubes
3. Two light weight polystyrene boxes each with three drawers
4. Upper drawer with medicine container of different sizes
5. Provision to hold oxygen cylinder made of M.S.
6. Massage board for cardiac patient are provided
7. Six Number colour hand out small bins at eye level
8. Total three S.S. Shelves with railings to carry Medical Equipments
9. Provided with S.S. l.V. Rod, Corner Buffers
10. The Cart mounted on 125 mm dia castors 2 with brakes
Also available in M.S. Frame work and laminated shelves (EI - 2175)
High pressure water steam electrically heated vertical sterilizer used for sterilizing of surgical instruments, Dressing materials, Linen, Rubber, Plastic material, Injection liquids by means of steam under pressure of 15 to 20 PSI. (Adjustiable) Tripple chamber with inner chamber and steam jacket made of thick stainless steel jacket made of thick stainless steel jacket. All sterilizers are hydraulically tested upto 2.5 times of working pressure. Outer chamber made of stainless steel sheet reinforced with M.S. sheet. Lid is made of thick stainless steel plate single piece and closed by wing nuts arrangement. Jointless neoprene gasket does not allow any leakage.
Fitted with double safety valve, Water level indicator, water inlet and drain valves. Supplied complete with cord and plug but without dressing bins, To work on 220 volts, Single Ph, 50 Hz,Ac supply.
Seamless construction made of aluminium alloy with turning on lid highly polished. It comes with one stop cock (continues bleeding valve), safety valve and pressure guage.
Size : (A) 12"x 12" (B) 12"x 22"