• +91 9334012534

  • excelindustriess@gmail.com

O.T. Equipments

SUCTION

Powder coated M.S. chassis

Noise level of suction apparatus from is 50 dB +/-03 dB

Leakage current of suction units is less than 84 μA

Electrical requirement- 220 ~ 230V, 50Hz, 1Phase

Ideal for MTP / medical / surgical procedures

Rotary Vane Type Vacuum Pump with-740 +/-10mm Hg

Free air displacement 40 ~ 60 ltrs / min

Heavy duty HN-65 antistatic castors

320 Watt, 1440 RPM, 0.50 H.P. Electric Motor

100mm Vacuum Gauge

Non collapsible Silicon tubing

2 x 2_0 Ltrs. Polycarbonate jars with over flow safety

Bacterial filter fitted on top

Pedal suction apparatus mainly used in hospitals of all levels for suctions of blood, phlegm ad other thick liquid.

TROLLEY

Overall Approx. Tray Size : 56L x 40Wcm.

Adjustable height of tray Approx. 760 to 1150mm through gear handle

Frame work made of 50 x 25mm rectangular S.S. tubes

Tray made of 0.9mm thick S.S. 304 Grade sheet

Table mounted on 50mm dia castors

Finish : S.S. Frame with S.S. top

Also available in M.S. Frame (EI - 1787)

Model No : EI - 1785A

O.T. MAYO'S INSTRUMENT TROLLEY WITH S.S. TRAY

Tray size S.S. : 56 L x 40 W cms.

Rectangular S.S. tubes mounted on 5cms Castors height adjustable by side Knob

S.S. Frame with S.S. top

Also available in M.S. Frame (EI - 1785)

Approx. Size : 3O" x 18" x 32”

Frame work made of S.S. tubes

Two S.S. Shelves over with S.S. railings

The trolley is fitted with S.S. bucket and S.S. bowl

The trolley mounted on 100mm dia castors

Also available in M.S. (EI - 1505)

Four leg base fitted with PVC Stumps

Height adjustment by machine screw from

A foot rest ring support made of M.S. Tube

S.S. top supported with M.S. sheet top

Finish : Pre-treated and Epoxy Powder Coated

Also available in S.S. Frame work and S.S. Top

Approx. Size 12”x 12"x 20”H

Top made of CRCA Sheet double bent

Legs made of 25mm x 18 G and Horizontal Support of 19mm x 18 G CRCA Tube fitted with PVC Stumps

Finish : Pre treated and Epoxy Powder Coated

Height adjustable

cushioned seat 5 legs base on castors

Frame work made of 1”x 18G vertical M.S. Tubes

Two 22G S.S. Shelves with 3 sides railing

The trolley mounted on 100mm dia castors

Finish : S.S. Frame with S.S. Shelves A- 30”x 18”x 32” / B- 36"x 24"x 32"

Also available in M.S. (EI - 1520)

Overall Approx. Size: 800mm L x 600mm D x 1400 H

Four shelves and one drawers

Trolley having two handle

The trolley mounted on 125mm dia castors -2 with brakes

Switch & Socket for medical equipment

Supplied with S.S. I.V. Rod and M.S. Oxygen Gas Cylinder Cage

Finish : Pre-treated and Epoxy Powder Coated

Overall Approx. Size : 960 x 500W x 1545H mm

Frame work made of S.S. Tubes

Two light weight polystyrene boxes each with three drawers

Upper drawer with medicine container of different sizes

Provision to hold oxygen cylinder made of M.S.

Massage board for cardiac patient are provided

Six Number colour hand out small bins at eye level

Total three S.S. Shelves with railings to carry Medical Equipments

Provided with S.S. l.V. Rod, Corner Buffers

The Cart mounted on 125 mm dia castors 2 with brakes

Also available in M.S. Frame work and laminated shelves (EI - 2175)

Model No : EI- 3700

VERTICAL HIGH PRESSURE STEAM STERILIZER AUTOCLAVE

High pressure water steam electrically heated vertical sterilizer used for sterilizing of surgical instruments, Dressing materials, Linen, Rubber, Plastic material, Injection liquids by means of steam under pressure of 15 to 20 PSI. (Adjustiable) Tripple chamber with inner chamber and steam jacket made of thick stainless steel jacket made of thick stainless steel jacket. All sterilizers are hydraulically tested upto 2.5 times of working pressure. Outer chamber made of stainless steel sheet reinforced with M.S. sheet. Lid is made of thick stainless steel plate single piece and closed by wing nuts arrangement. Jointless neoprene gasket does not allow any leakage.

Fitted with double safety valve, Water level indicator, water inlet and drain valves. Supplied complete with cord and plug but without dressing bins, To work on 220 volts, Single Ph, 50 Hz,Ac supply.

Model No : EI- 3655

AUTO CLAVE (PORTABLE) SINGLE/DOUBLE DRUM

Seamless construction made of aluminium alloy with turning on lid highly polished. It comes with one stop cock (continues bleeding valve), safety valve and pressure guage.

Size : (A) 12"x 12" (B) 12"x 22"

INSTRUMENTS